Availability: | |
---|---|
Quantity: | |
The SUP2S welding system is packaged in three layers. This article describes the configuration and function of related accessories and main parts.
10 protective lenses / 8 nozzles
2 power switches
1 ground clip
The standard system line is 10 meters
1 gun
1 set of system
1 display
level one
Including 24V+15V switching power supply, touch screen
Second floor
Including copper nozzle accessories box and accessories package
The copper nozzle accessories box contains conventional copper nozzles and scale tubes (see Process: Selection of Copper Nozzles for details)
The accessories package includes the protective mirror, the connecting cable of the touch screen, the fixing screw of the touch screen, the clip for the safety lock (connected to the 5-pin of the signal interface 1)
the third floor
The control box and the welding gun are connected directly by the motor wire in the middle. When installing, you need to disassemble the control box and remove the terminal block.
The motor power/signal wires (two black wires) are directly connected to the motor part of the welding head and can be removed (two options are available: 1. Open the motor cover and side panel of the hand-held welding gun 2. Open the control box, both are plugs)
The three-core wire for safety lock and trigger button uses detachable aerial plugs: safety lock and button wires, 1 blue, 2 black, and 3 brown (connect to pin 6/7/8 of signal interface 1, see control box wiring for details) definition)