Dual Channel Water-cooled Chiller system for 6kw fiber laser and cutting head TEYU S&A CWFL-6000
TEYU S&A CWFL-6000 dual-temperature chiller is equipped with two channels of water cooling to cool the laser source and laser cutting head at the same time. One is multi-purpose, which saves costs and is convenient for customers. Customers no longer have to worry about taking up space . CWFL-6000 adopts dual-temperature dual-control mode to provide temperature control solutions for fiber lasers in all directions. At the same time, users can manually set the water temperature or switch to the intelligent temperature control mode according to actual needs.
In addition, CWFL-6000 industrial chillers all include input and output control device switches, as well as advanced functions of cooling water flow, high and low temperature alarms.
The warranty period is 2 years.
Main features of CWFL-6000 laser chiller:
(1) Main components: adopts branded compressors and high-flow high-lift pumps, which are safe and environmental friendly, energy-saving and durable.
(2) Spare parts: Stable working performance and long service life.
(3) Function:
1. Optional environmentally friendly refrigerant R410A;
2. The temperature control accuracy reaches ±1℃;
3. Support ModBus-485 communication; there are multiple settings and fault display functions;
4. With a variety of alarm protection functions: compressor delay protection; compressor overcurrent protection; water flow alarm; temperature over/low alarm; dual pumps and dual temperature, to meet the different needs of fiber laser main body and lens;
5. Multi-national power supply specifications; CE, RoHS, REACH certification;
6. Longer lifetime and durability, easy operate;
7. Optional for heater and purified water configuration.
Specification :
Model: | CWFL-6000EN | CWFL-6000FN |
Voltage: | AC 3P 380V | AC 3P 380V |
Frequency: | 50Hz | 60Hz |
Unit Power: | 5.71kw | 6.01kw |
Current: | 3.4~11.5A | 3.4~11.2A |
Electric assisted power: | 400W+1800W | |
Precision: | ±1°C | |
Pump power: | 1.1kw | |
Tank capacity: | 70L | |
Lift: | 53M | |
Rated flow | 2 L/min+>50 L/min | |
N.weight: | 200 Kgs | |
G.weight: | 260Kgs | |
Dimension: | 105X 71 X 133 cm (LX W X H) | |
Package dimension: | 132X 86X 153 cm (LX W X H) |
Remark: the working current can be different under different working conditions; The above information is for reference only. Please subject to the actual delivered product.
Note:
1. The working current can be different under different working conditions; The above information is for reference only. Please subject to the actual delivered product;
2. Clean, pure, impurity free water should be used. The ideal one could be purified water, clean distilled water, deionised water, etc.;
3. Change out the water periodically (every 3 months is suggested or depending on the actual working environment);
4. Location of the chiller should be well ventilated environment. There must be at least 50cm from the obstacles to the air outlet which is on the top of the chiller and should leave at least 30cm between obstacles and the air inlets which are on the side casing of the chiller.
Laser Nozzles Ceramic Holders Collimation/Focus lens Tube Tooling Kits Goggles Ceramic Locker Ring Seal Ring/Washer