Raycus laser source Single Module CW Fiber Lasers RFL-C300L for laser welding/cutting
Raycus CW Fiber Laser 500-20000W Cutting Parameters.pdf
The third-generation single-module CW fiber laser developed by Raycus Laser covers products ranging from 300W to 12000W. The new generation of lasers has high electro-optical conversion efficiency, good beam quality, high energy density, wide modulation frequency, high reliability and long life. , maintenance-free operation, etc. At the same time, an optimized second-generation optical fiber transmission system is introduced to ensure a more stable and precise cutting effect in thick plate cutting. The machine can be applied to a variety of applications: cutting, welding, punching, scribing and other fields. The cut sheet has a narrow slit and a bright section, which has obvious advantages over the same type of laser.
Technical advantages:
High electro-optical conversion efficiency
Anti-high anti-reaction ability
Efficient thin plate cutting
Output fiber length can be customized
Air-cooled or water-cooled optional
Maintenance-free operation
Wide modulation frequency range
Optical properties:
Average output power (W): 250
Center wavelength (nm): 1080±5
Operating Mode: Continuous/Modulated
Maximum modulation frequency (kHz): 20
Output power stability: ±1.5%
Red light indicates output power (mW): 0.5~1
Output characteristics:
Output connector: QBH (can be customized)
Beam quality: <1.1(25um)
Polarization State: Random
Output fiber length (m): 15 (can be customized)
Electronic control features:
Input power: 220±10% V AC, 50/60Hz
Control mode: RS232/AD/Ethernet
Power adjustment range (%): 10~100
Other features:
Dimensions (mm) W*H*D: 485×237×663 (including handle)
Weight (kg): <25
Cooling method: water cooling
Working temperature (℃): 10-40
Application of RFL-C300L:
Fine cutting metal welding sheet punching metal scribing surface treatment
